Snow Performance Stage 3 - Pro Line - DI, FSI

 

*** NEW! - ProLine Version ***
Award-Winning Water Methanol Injection System - our high-end model for every engine with Direct Injection.
The Boost Cooler Stage 3 DI Controller creates a 2D-delivery map based boost and fuel pressure sensor voltage. Easy programmable LCD-display with new Dual Stage Injection Technology.

Ideal for all turbo-/supercharged engines with direct injection (VAG TSI/TFSI, PSA THP, Ford/Opel Ecotec etc.).

Snow Performance Stage 3 Boost Cooler DI 2D MAP Prog. Water Injection Kit (Stainless Steel Braided Line & -4AN)

 

Features

  • Boost / fuel controlled, variable injection
  • Dual Stage Technology
  • ProLine Version: High-Quality Stainless Steel Flex Lines and Connection Technology
  • Efficient Intercooling, up to 60°C lower air intake temperature
  • Achieve approx. 116-Octan rating, by using ordinary 95-Octan gasoline
  • Reduces EGT and oil temperatures
  • Allows you to run safely more boost and/or more timing
  • Reduces thermical stress on NOS, LPG/Autogas and pre-tuned engines like chiptuning & higher boost levels
  • No wear issues, only clean combustion chambers
  • No loss of boost as with an intercooler
  • Reduces the specific fuel consumption
  • Easy installation

Optimal Cooling with Water Injection

Obtain up to 10-25% more power in your turbo- or supercharged engine, even if it´s pre-tuned, by using the Boost Cooler Water-Methanol Injection System from SNOW Performance.

The main function of the Boost Cooler is to suppress detonation caused by high temperature and pressure developed within the combustion chamber when the effective compression ratio has been taken beyond the auto-ignition point by either a turbo or a supercharger. Water, with its high latent heat content, is extremely effective for controlling not only the onset of detonation but also the production of oxides of nitrogen in the modern leanburn engines.

Furthermore, the Boost Cooler doesn't create an intake restriction like an intercooler, and unlike race gas, it reduces intake air temps up to 60°C and improves charge air density too.

SNOW Performance systems effectively steam clean the valves, valve seats, and even the piston tops and intake when they inject. This reduces carbon build up. The Boost Cooler can be installed in a matter of hours without having to remove bumpers or do custom intake piping.

More Power by Boost Cooler

With the Boost Cooler, you can achieve up to 25% extra power in every direct injected super- and turbocharged engine. The optimal cooling compensates also power losses at higher outside temperatures. In addition, deposits in the combustion chamber and intake manifold are reduced.

116 Octane Race Gas Performance

Water or water/methanol is injected into the intake air using the patented high-pressure pump. The evaporation mist achieves extremely effective intake air and intercooling, whereby, among other things, an uncontrolled combustion ("knocking") is prevented. The effect is demonstrably comparable with 116 octane racing gasoline.

Boost Cooler Stage 3 DI - tailored for your needs

The Stage 3 DI DST has been designed for any Direct Injected engine (like VAG T/FSI, Peugeot THP) and creates a 2D injection map based off boost and fuel pressure sensor voltage (on VAG vehicles, "G247" fuel pressure sensor).

Dual Stage Technology

The Stage 3 has the ability to progressively command 2 Hyper-Sonic Nozzles independently of one another. This sophisticated dual stage injection management yields the highest increases in HP and cooling along all stages of the engine allowing you to greatly increase the boost & timing of your vehicle safely. The DST-Upgrade is already included in the European Stage 3 systems.

The most efficient system on the market

The award winning Boost Cooler Stage 3 DI systems are unbeatable in terms of precision and setting options! The Stage 3 creates a 2D injection map based off boost and fuel injection quantity to deliver the most accurate and tunable water-meth delivery on the market.

Stage 3 DI - Controlled Variable Injection

Award Winning System! - The Stage 3 Boost Cooler is unmatched for accuracy and adjustability in water-methanol injection systems! This system can be used on any forced induction direct injected engine and features our LCD display with on-the-fly adjustability.

Extremely easy to set up and dial in - the software creates a delivery map based on boost and fuel pressure sensor signal from just a few easy to set points you punch in from the drivers seat. The LCD Screen displays boost pressure, fuel injector signal, as well as water-methanol injection percent. Quick, easy, positive adjustments are made with 2 push buttons. Low profile design allows for easy-to-view and discrete mounting.

Scope of delivery

  • 1 x High Pressure Diaphragm EPDM Pump, 300 PSI UHO
  • 1 x Boost Cooler Stage 3 DI 2D LCD-Controller
  • 1 x ProLine Dual Stage Upgrade
  • 2 x HyperSonic Water-Methanol Nozzle incl. filter
  • 1 x 3l Boost Cooler Water-Methanol Injection Reservoir
  • 1 x Low level indicator (includes LED)
  • 1 x ProLine stainless steel braided line (1x30cm, 1x60cm, 1x1.5m)
  • 2 x Nozzle Holder, 90°, Aluminium hard-anondized
  • 1 x Installation material and all necessary ProLine fittings
  • 1 x Installation instructions


SP10317PRO SNO-320-BRD

Snow Performance Stage 3 - Pro Line - DI, FSI

$673.68

Snow Performance Stage 3 - Pro Line - DI, FSI Snow Performance Stage 3 - Pro Line - DI, FSI Snow Performance Stage 3 - Pro Line - DI, FSI Snow Performance Stage 3 - Pro Line - DI, FSI Snow Performance Stage 3 - Pro Line - DI, FSI Snow Performance Stage 3 - Pro Line - DI, FSI Snow Performance Stage 3 - Pro Line - DI, FSI
Snow Performance Stage 3 - Pro Line - DI, FSI Snow Performance Stage 3 - Pro Line - DI, FSI Snow Performance Stage 3 - Pro Line - DI, FSI Snow Performance Stage 3 - Pro Line - DI, FSI Snow Performance Stage 3 - Pro Line - DI, FSI Snow Performance Stage 3 - Pro Line - DI, FSI Snow Performance Stage 3 - Pro Line - DI, FSI

Snow Performance Stage 3 - Pro Line - DI, FSI

$673.68

$673.68

 

*** NEW! - ProLine Version ***
Award-Winning Water Methanol Injection System - our high-end model for every engine with Direct Injection.
The Boost Cooler Stage 3 DI Controller creates a 2D-delivery map based boost and fuel pressure sensor voltage. Easy programmable LCD-display with new Dual Stage Injection Technology.

Ideal for all turbo-/supercharged engines with direct injection (VAG TSI/TFSI, PSA THP, Ford/Opel Ecotec etc.).

Snow Performance Stage 3 Boost Cooler DI 2D MAP Prog. Water Injection Kit (Stainless Steel Braided Line & -4AN)

 

Features

  • Boost / fuel controlled, variable injection
  • Dual Stage Technology
  • ProLine Version: High-Quality Stainless Steel Flex Lines and Connection Technology
  • Efficient Intercooling, up to 60°C lower air intake temperature
  • Achieve approx. 116-Octan rating, by using ordinary 95-Octan gasoline
  • Reduces EGT and oil temperatures
  • Allows you to run safely more boost and/or more timing
  • Reduces thermical stress on NOS, LPG/Autogas and pre-tuned engines like chiptuning & higher boost levels
  • No wear issues, only clean combustion chambers
  • No loss of boost as with an intercooler
  • Reduces the specific fuel consumption
  • Easy installation

Optimal Cooling with Water Injection

Obtain up to 10-25% more power in your turbo- or supercharged engine, even if it´s pre-tuned, by using the Boost Cooler Water-Methanol Injection System from SNOW Performance.

The main function of the Boost Cooler is to suppress detonation caused by high temperature and pressure developed within the combustion chamber when the effective compression ratio has been taken beyond the auto-ignition point by either a turbo or a supercharger. Water, with its high latent heat content, is extremely effective for controlling not only the onset of detonation but also the production of oxides of nitrogen in the modern leanburn engines.

Furthermore, the Boost Cooler doesn't create an intake restriction like an intercooler, and unlike race gas, it reduces intake air temps up to 60°C and improves charge air density too.

SNOW Performance systems effectively steam clean the valves, valve seats, and even the piston tops and intake when they inject. This reduces carbon build up. The Boost Cooler can be installed in a matter of hours without having to remove bumpers or do custom intake piping.

More Power by Boost Cooler

With the Boost Cooler, you can achieve up to 25% extra power in every direct injected super- and turbocharged engine. The optimal cooling compensates also power losses at higher outside temperatures. In addition, deposits in the combustion chamber and intake manifold are reduced.

116 Octane Race Gas Performance

Water or water/methanol is injected into the intake air using the patented high-pressure pump. The evaporation mist achieves extremely effective intake air and intercooling, whereby, among other things, an uncontrolled combustion ("knocking") is prevented. The effect is demonstrably comparable with 116 octane racing gasoline.

Boost Cooler Stage 3 DI - tailored for your needs

The Stage 3 DI DST has been designed for any Direct Injected engine (like VAG T/FSI, Peugeot THP) and creates a 2D injection map based off boost and fuel pressure sensor voltage (on VAG vehicles, "G247" fuel pressure sensor).

Dual Stage Technology

The Stage 3 has the ability to progressively command 2 Hyper-Sonic Nozzles independently of one another. This sophisticated dual stage injection management yields the highest increases in HP and cooling along all stages of the engine allowing you to greatly increase the boost & timing of your vehicle safely. The DST-Upgrade is already included in the European Stage 3 systems.

The most efficient system on the market

The award winning Boost Cooler Stage 3 DI systems are unbeatable in terms of precision and setting options! The Stage 3 creates a 2D injection map based off boost and fuel injection quantity to deliver the most accurate and tunable water-meth delivery on the market.

Stage 3 DI - Controlled Variable Injection

Award Winning System! - The Stage 3 Boost Cooler is unmatched for accuracy and adjustability in water-methanol injection systems! This system can be used on any forced induction direct injected engine and features our LCD display with on-the-fly adjustability.

Extremely easy to set up and dial in - the software creates a delivery map based on boost and fuel pressure sensor signal from just a few easy to set points you punch in from the drivers seat. The LCD Screen displays boost pressure, fuel injector signal, as well as water-methanol injection percent. Quick, easy, positive adjustments are made with 2 push buttons. Low profile design allows for easy-to-view and discrete mounting.

Scope of delivery

  • 1 x High Pressure Diaphragm EPDM Pump, 300 PSI UHO
  • 1 x Boost Cooler Stage 3 DI 2D LCD-Controller
  • 1 x ProLine Dual Stage Upgrade
  • 2 x HyperSonic Water-Methanol Nozzle incl. filter
  • 1 x 3l Boost Cooler Water-Methanol Injection Reservoir
  • 1 x Low level indicator (includes LED)
  • 1 x ProLine stainless steel braided line (1x30cm, 1x60cm, 1x1.5m)
  • 2 x Nozzle Holder, 90°, Aluminium hard-anondized
  • 1 x Installation material and all necessary ProLine fittings
  • 1 x Installation instructions


SP10317PRO SNO-320-BRD